Discussion:
[G0MGX] Finishing 3cm
(too old to reply)
G0MGX via rec.radio.amateur.moderated Admin
2018-04-03 15:25:16 UTC
Permalink
G0MGX In the Shack

///////////////////////////////////////////
Finishing 3cm

Posted: 03 Apr 2018 08:08 AM PDT
http://g0mgx.blogspot.com/2018/04/finishing-3cm.html

Well,

Following my musings back here, I've finished the portable 3cm thingamabob:


I've moved the sequencer to be on top of the transverter box and added some
surplus heatsyncs to the PA module.

I've even made a metal sheet and drilled it so it all fits on the arm of
the dish.

I've also been up to Alport Heights today to test the portable 13cm setup:


Here's a clip of the reception of GB3ZME from the top of the hill:


Good, egh?
Spike
2018-04-03 16:17:41 UTC
Permalink
Post by G0MGX via rec.radio.amateur.moderated Admin
G0MGX In the Shack
///////////////////////////////////////////
Finishing 3cm
Posted: 03 Apr 2018 08:08 AM PDT
http://g0mgx.blogspot.com/2018/04/finishing-3cm.html
I've moved the sequencer to be on top of the transverter box and
added some surplus heat-syncs
Or even heat-sinks.
Post by G0MGX via rec.radio.amateur.moderated Admin
to the PA module. I've even made a metal sheet and
drilled it so it all fits on the arm of the dish.
Good, egh?



Good egg, eh?
--
Spike

"RSGBTech is meant for everyone", or so the RSGB says. The group is
moderated 'to
ensure that the questions are on topic', but the group's own admissions
policy mention
(a pre-) 'vet', 'known', 'trouble', and 'maker', but not the vetting
policy! None of these are
'moderation' issues and none are mentioned in the RSGB's Guidelines.....
Loading...